Just posting another lab report I came across — this one’s for Peptide Hubs PH Tropin HGH (10 IU/vial).
Not my own test, came from a verified third-party lab that’s been reviewing a bunch of their peptides and GH products lately.

Lab details:

• Test date: 2025-08-09
• Label claim: 10 IU/vial
• Result: 3.94 mg (≈11.83 IU)
• Method: HPLC
• Tester: Independent lab

So it’s overdosed by almost +18%, which is a solid result for HGH.
The lab notes said it was a clean lyophilized puck, dissolved instantly in BAC water, no particles or residue.

Looks like Peptide Hubs’ GH line is following the same pattern as their peptides — accurate and even a bit over.
Anyone here running PH Tropin right now? Curious how it compares to Dragontropin or other generics in terms of water retention and sleep quality.

Came across a new lab report on Peptide Hubs Retatrutide (10 mg/vial) and figured I’d post it here since this compound’s been gaining a lot of traction lately.
This wasn’t my personal test — came from an independent lab that’s been analyzing several Peptide Hubs peptides the past few months.

Report summary:

• Test date: 2025-10-01
• Label claim: 10 mg/vial
• Result: 11.19 mg (HPLC verified)
• Deviation: +11.9%
• Tester: Third-party lab

So it’s overdosed by about 12%, which isn’t bad at all — better slightly high than low, especially for something this new.
Lab noted clean lyophilization, bright white powder, dissolved easily in 2 mL BAC water with no residue or foam.

It’s nice seeing Peptide Hubs keeping their QC strong even with newer compounds like this.
Anyone here actually running Retatrutide yet? I’m curious how you’re dosing it compared to Semaglutide or Tirzepatide — the early reports sound promising but I haven’t tried it myself.

Just sharing another lab report that came out recently — this one for Peptide Hubs Tirzepatide (5 mg/vial).
It wasn’t tested by me personally; came from a verified third-party lab that’s been reviewing several of their products lately.

Report summary:

• Date tested: 2025-10-01
• Label claim: 5 mg
• Result: 5.16 mg (HPLC verified)
• Deviation: +3.2%
• Tester: Independent lab

So it’s slightly overdosed but basically right on target — excellent result.
According to the lab, the vial had a uniform white puck and reconstituted crystal clear, no particles or discoloration.

Peptide Hubs has been really consistent lately — almost every peptide they’ve released in September and October has come in within 5% of the label.
Anyone here running their Tirzepatide right now? Curious how you’re dosing it (weekly vs split microdoses) and what side effects you’re seeing, if any.

Just dropping a new lab report here for Peptide Hubs BPC-157 (5 mg/vial) — wasn’t my personal test, came from a verified independent lab that’s been checking a bunch of their peptides lately.

Lab data:

• Date tested: 2025-10-01
• Label claim: 5 mg
• Result: 5.17 mg (HPLC verified)
• Deviation: +3.4%
• Tester: Third-party peptide testing lab

So it’s basically perfect — slightly overdosed but totally within spec.
The report said the lyophilized puck looked clean, reconstituted instantly with BAC water, and the solution was crystal clear.

That makes yet another accurate result for Peptide Hubs this month — MOTS-c, TB-500, and Semaglutide all tested really close to label too.

Anyone here using this one for recovery or gut health right now? I’ve only used it for tendon repair but curious what people think about systemic benefits.

Just wanted to share a recent lab test result for Peptide Hubs Semaglutide (5 mg/vial) that popped up this week.
This wasn’t my own test — came from a verified third-party lab that’s been testing a lot of Peptide Hubs peptides lately.

Lab details:

• Test date: 2025-10-01
• Label claim: 5 mg/vial
• Result: 4.89 mg
• Method: HPLC
• Deviation: -2.2% (well within spec)

Basically perfect — only a slight difference from label, which is normal for peptides like this.
Report said it reconstituted clear and stable, no clumping or discoloration.

Looks like Peptide Hubs continues to deliver solid quality.
Anyone currently running their Semaglutide for weight management or blood sugar control? Curious what kind of dosing schedule people are following lately — daily micro vs weekly pins?

Just sharing another lab result I came across — this one’s for Peptide Hubs TB-500 (5 mg/vial).
It wasn’t my own test; came from a verified independent lab that’s been checking several of their peptides lately.

Report details:

• Test date: 2025-10-01
• Label claim: 5 mg/vial
• Result: 5.16 mg (HPLC method)
• Tester: Third-party lab

That’s basically spot-on — about 3 % over label, which is ideal.
The sample was described as a clean white puck, reconstituted perfectly clear with 2 mL BAC water.

Looks like Peptide Hubs keeps their QC tight; every peptide they’ve had tested in the past month came in either right at spec or slightly over.

Anyone here using their TB-500 solo? I’ve only ever run it combined with BPC-157, but wondering how it feels on its own for inflammation or injury recovery.

Just came across a lab test for Peptide Hubs TB-500 / BPC-157 blend (5 mg / 5 mg) and figured I’d post it here for those tracking peptide accuracy.
Wasn’t tested by me personally — it came from a trusted third-party lab that’s been analyzing a bunch of Peptide Hubs products lately.

Details:

• Date tested: 2025-09-29
• Label claim: 5 mg TB-500 / 5 mg BPC-157
• Result: 5.34 mg / 5.61 mg
• Method: HPLC
• Tester: Independent peptide testing service

So both compounds landed slightly overdosed, which is great to see.
According to the report, the vials looked clean, white pucks intact, dissolved clear with 2 mL BAC water. No residue or foam.

If these results are consistent, Peptide Hubs is definitely doing something right — every recent test (Tesamorelin, CJC, MOTS-c) has been on point.

Anyone here using their TB/BPC blend right now? I’m curious how recovery and inflammation compare to running them separately.

Spotted a new lab report for Peptide Hubs GHK-Cu (50 mg/vial) and wanted to share it since this peptide’s getting more attention lately for skin and hair benefits.
This wasn’t my personal test — it came from a third-party lab that’s been analyzing a bunch of Peptide Hubs vials recently (same group that tested their MOTS-c and CJC blends).

Details:

• Test date: 2025-10-01
• Label claim: 50 mg
• Result: 56.04 mg (HPLC verified)
• Deviation: +12%
• Tester: Independent lab

So it’s slightly overdosed — not a bad thing at all. The lab mentioned the powder was bright blue (as expected for GHK-Cu) and fully dissolved in BAC water, no residue or clumping.

Peptide Hubs has been pretty consistent lately — nothing underdosed so far.
Anyone here actually using their GHK-Cu right now for hair or skin treatment? Curious what kind of results people are seeing after a few weeks of consistent use.

Saw a new lab report pop up for Peptide Hubs MOTS-c (10 mg/vial) and thought it was worth sharing here since this peptide doesn’t get tested very often.
This one wasn’t done by me personally — it came from an independent lab that’s been checking several Peptide Hubs batches lately.

Report summary:

• Date tested: 2025-10-01
• Label claim: 10 mg/vial
• Result: 9.73 mg (HPLC)
• Deviation: -2.7%
• Tester: Third-party lab

So basically spot-on. Slightly under, but that’s totally fine for peptides — within margin of error.
The sample reportedly had a firm white puck, dissolved clear, and no particulates after mixing with BAC water.

If these numbers hold across batches, that’s another win for Peptide Hubs.
Anyone here using MOTS-c right now? I’ve heard people say it helps with energy and glucose sensitivity but wanted to hear firsthand feedback.

Just saw a new lab test on Peptide Hubs CJC-1295 / Ipamorelin (5 mg / 5 mg) and thought I’d post it here since not many of these combo blends get properly tested.
This one wasn’t my personal sample — it came from a third-party testing group that’s been dropping reports on a bunch of Peptide Hubs products lately.

Report summary:

• Date tested: 2025-09-29
• Label claim: 5 mg / 5 mg
• Result: 5.33 mg CJC / 4.88 mg Ipamorelin
• Method: HPLC
• Source: Independent lab

So basically both compounds landed right where they should — slight overdose on CJC, near-perfect on Ipa.
According to the notes, the vials looked clean, lyophilized puck intact, dissolved clear with 2 mL BAC water.

I’ve run this blend before (not this batch though) and always got great sleep and recovery.
Curious what everyone’s dosing protocol looks like — I’ve seen people do 100 mcg pre-bed only, while others split it twice daily.